Contract Data Requirements List
https://en.wikipedia.org/wiki/Contract_data_requirements_list
The developers of the platform have agreed to publish the MoHSES platform under the following open source licensing option:
Creative Commons Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0/deed.ast
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
The developers of the platform have agreed to publish the MoHSES platform under the following open source licensing option:
Creative Commons Attribution 4.0 International (CC BY 4.0) https://creativecommons.org/licenses/by/4.0/deed.ast
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
- CDRL A001 - SDD (Software Design Description)
- CDRL A002 – SPS (Software Product Specification)
- CDRL A003 - Commercial Drawings and Associated Lists
- CDRL A004 – Product Drawings/Models and Associated Lists
- CDRL A005 – SUM (Software Product Specification)
- CDRL A006 - Page-based Technical Manual (TM)
- CDRL A007 - Interface Design Description (IDD)
- CDRL A008 - System/Subsystem Specification (SSS)
- CDRL A009 - Test Procedure
- CDRL A010 - Test/Inspection Report
- CDRL A011 - Interface Control Document (ICD)
CDRL A001 - SDD
This document is the MoHSES Software Design Description CDRL A001 SDD of Contract # W81XWH-14-C-0101, Phase II. The outline and subject matter content are based on DID DI-IPSC-81435A as required by the contract. The DID has been tailored to describe an open platform and open-source reference software that can be run on either the MoHSES reference computer hardware, or other user-selected computer systems. This document is unclassified and contains no proprietary information, trade secrets, copyrighted material or classified information. Unlimited distribution.
The purpose of the SDD is to describe the MoHSES reference software that, in conjunction with the Interface Design Description (IDD) CDRL A007, and Software Product Specification (SPS) CDRL A002, can be used by developers to create new MoHSES modules.
A software design description (a.k.a. software design document or SDD; just design document; also Software Design Specification) is a written description of a software product, that a software designer writes in order to give a software development team overall guidance to the architecture of the software project. An SDD usually accompanies an architecture diagram with pointers to detailed feature specifications of smaller pieces of the design. Practically, the description is required to coordinate a large team under a single vision, needs to be a stable reference, and outline all parts of the software and how they will work.
The purpose of the SDD is to describe the MoHSES reference software that, in conjunction with the Interface Design Description (IDD) CDRL A007, and Software Product Specification (SPS) CDRL A002, can be used by developers to create new MoHSES modules.
A software design description (a.k.a. software design document or SDD; just design document; also Software Design Specification) is a written description of a software product, that a software designer writes in order to give a software development team overall guidance to the architecture of the software project. An SDD usually accompanies an architecture diagram with pointers to detailed feature specifications of smaller pieces of the design. Practically, the description is required to coordinate a large team under a single vision, needs to be a stable reference, and outline all parts of the software and how they will work.
| a001_cdrl_sdd_amm_w81xwh-14-c-0101-31_03feb2020_rev2.docx |
CDRL A002 – SPS (Software Product Specification)
This is the Modular Healthcare Simulation and Education System (MoHSES) Software Product Specification (SPS) CDRL Item A002 of Contract # W81XWH-14-C-0101, Phase II. This SPS describes the “as built” design of the MoHSES Reference Software Computer Software Configuration Items (CSCIs) and describes the compilation, build, and modification procedures.
This CDRL is formatted to the requirements of Data Item Description Number DI-IPSC-81441A as required. It has been tailored to reflect the fact that the MoHSES Reference Implementation has been designed to run on a wide range of Linux and Windows systems.
The Software Product Specification (SPS) contains or references the executable software, source files, and software support information, including "as built" design information and compilation, build, and modification procedure.
This CDRL is formatted to the requirements of Data Item Description Number DI-IPSC-81441A as required. It has been tailored to reflect the fact that the MoHSES Reference Implementation has been designed to run on a wide range of Linux and Windows systems.
The Software Product Specification (SPS) contains or references the executable software, source files, and software support information, including "as built" design information and compilation, build, and modification procedure.
| a002_cdrl_sps_amm_w81xwh-14-c-101_03feb2020_rev2.docx |
CDRL A003 - Commercial Drawings and Associated Lists
CDRL A003 is intended for acquiring drawings and associated lists for commercial products at the end of the System Development and Demonstration Phase and during subsequent phases of the DoD materiel life cycle. The outline and subject matter content are based on DI-SESS-81000E as required by the contract. The DID has been tailored as appropriate. The commercial drawings and associated lists are contractor format.
All drawings and lists included in this document are either required components of the core MoHSES system that for compliance purposes must be included in the system or components included as part of a reference implementation to demonstrate the functionality of MoHSES platform. For instance, components of the fluidics system may not be required for modules being developed for the platform as long as the connectors are MoHSES compatible. Contact the Technical Director: [email protected] for further information.
The drawing reference document (Dwg. No. 100100) includes the system schematic design documents and an indented bill of materials for the mechanical assembly. Drawing reference items with 6-digit numerical part numbers are contractor assemblies and manufactured parts. All commercial items are referenced with drawing number indicating OEM in short form and OEM part number. Commercial items are further documented in this document. Contractor assemblies are documented in CDRL A004.
All drawings and lists included in this document are either required components of the core MoHSES system that for compliance purposes must be included in the system or components included as part of a reference implementation to demonstrate the functionality of MoHSES platform. For instance, components of the fluidics system may not be required for modules being developed for the platform as long as the connectors are MoHSES compatible. Contact the Technical Director: [email protected] for further information.
The drawing reference document (Dwg. No. 100100) includes the system schematic design documents and an indented bill of materials for the mechanical assembly. Drawing reference items with 6-digit numerical part numbers are contractor assemblies and manufactured parts. All commercial items are referenced with drawing number indicating OEM in short form and OEM part number. Commercial items are further documented in this document. Contractor assemblies are documented in CDRL A004.
| a003_cdrl_commercial_drawings___associated_lists__amm_w81xwh-14-c-0101_03feb2020_rev2.docx |
CDRL A004 – Product Drawings/Models and Associated Lists
This CDRL Item A004 of Contract # W81XWH-14-C-0101, Phase II provides MoHSES product drawings/models and associated lists.
The outline and subject matter content of CDRL A004 are based on DI-SESS-81000E as required by the contract. The DID has been tailored as appropriate.
The reference system design CAD is in SolidWorks. The drawing reference document (Dwg. No. 100100) includes the system schematic design documents and an indented bill of materials for the mechanical assembly. The drawings/models and associated lists are contractor format.
Drawing reference items with 6-digit numerical part numbers are contractor assemblies and manufactured parts. All commercial items are referenced with drawing number indicating OEM in short form and OEM part number. Commercial items are further documented in CDRL A003.
The outline and subject matter content of CDRL A004 are based on DI-SESS-81000E as required by the contract. The DID has been tailored as appropriate.
The reference system design CAD is in SolidWorks. The drawing reference document (Dwg. No. 100100) includes the system schematic design documents and an indented bill of materials for the mechanical assembly. The drawings/models and associated lists are contractor format.
Drawing reference items with 6-digit numerical part numbers are contractor assemblies and manufactured parts. All commercial items are referenced with drawing number indicating OEM in short form and OEM part number. Commercial items are further documented in CDRL A003.
| a004_cdrl_product_drawings_models___lists__amm_w81xwh-14-c-0101_03feb2020-rev2.docx |
CDRL A005 – SUM (Software Product Specification)
This is the final version of the Software User’s Manual as required by CDRL A005. The outline and subject matter content are based on DID DI-IPSC-81443A as required by the contract. The DID has been tailored as appropriate. This document is unclassified and contains no proprietary information, trade secrets, copy righted material or classified information. Unlimited distribution.
This CDRL is formatted to the requirements of Data Item Description Number DI-IPSC-81443A as required. This document is a Software User Manual which identifies the necessary information for a module supplier to successfully interface to software in the manikin.
A user guide, also commonly called a technical communication document or manual, is intended to give assistance to people using a particular system.[1] It is usually written by a technical writer, although user guides are written by programmers, product or project managers, or other technical staff, particularly in smaller companies.[2]
User guides are most commonly associated with electronic goods, computer hardware and software, although they can be written for any product.[3]
Most user guides contain both a written guide and associated images. In the case of computer applications, it is usual to include screenshots of the human-machine interface(s), and hardware manuals often include clear, simplified diagrams. The language used is matched to the intended audience, with jargon kept to a minimum or explained thoroughly.
This CDRL is formatted to the requirements of Data Item Description Number DI-IPSC-81443A as required. This document is a Software User Manual which identifies the necessary information for a module supplier to successfully interface to software in the manikin.
A user guide, also commonly called a technical communication document or manual, is intended to give assistance to people using a particular system.[1] It is usually written by a technical writer, although user guides are written by programmers, product or project managers, or other technical staff, particularly in smaller companies.[2]
User guides are most commonly associated with electronic goods, computer hardware and software, although they can be written for any product.[3]
Most user guides contain both a written guide and associated images. In the case of computer applications, it is usual to include screenshots of the human-machine interface(s), and hardware manuals often include clear, simplified diagrams. The language used is matched to the intended audience, with jargon kept to a minimum or explained thoroughly.
| a005_cdrl_sum_amm_w81xwh-14-c-101_03feb2020_rev2.docx |
CDRL A006 - Page-based Technical Manual (TM)
This is the final document version as required by CDRL A006. The outline and subject matter content are based on MIL-STD-40051-2C as required by the contract. The DID has been tailored as appropriate. This document is unclassified and contains no proprietary information, trade secrets, copyrighted material or classified information. Unlimited distribution.
This document is a Page-based Technical Manual which identifies the necessary information for manikin operation.
This document is a Page-based Technical Manual which identifies the necessary information for manikin operation.
| a006_cdrl_page-based_technical_manual_amm_w81xwh-14-c-101_03feb2020_rev_2.docx |
CDRL A007 - Interface Design Description (IDD)
This document is the MoHSES Interface Design Document (IDD) CDRL A007 of Contract # W81XWH-14-C-0101, Phase II. The outline and subject matter content are based on DID DI-IPSC-81436A, as required by the contract. The DID has been tailored to describe an open platform and open-source reference software that can be run on either the MoHSES reference computer hardware, or other user-selected computer systems. This document is unclassified and contains no proprietary information, trade secrets, copyrighted material or classified information and is available for unlimited distribution.
The Interface Design Description (IDD) describes the interface characteristics of one or more systems, subsystems, Hardware Configuration Items (HWCIs), Computer Software Configuration Items (CSCIs), manual operations, or other system components. An IDD may describe any number of interfaces.
The Interface Design Description (IDD) describes the interface characteristics of one or more systems, subsystems, Hardware Configuration Items (HWCIs), Computer Software Configuration Items (CSCIs), manual operations, or other system components. An IDD may describe any number of interfaces.
| a007_cdrl_idd_amm_w81xwh-14-c-0101_03feb2020_rev2.docx |
CDRL A008 - System/Subsystem Specification (SSS)
This document is the System/Subsystem Specification (SSS) CDRL Item A008 of Contract # W81XWH-14-C-0101, Phase II. The outline and subject matter content are based on DID DI-IPSC-81431A as required by the contract. The DID has been tailored as appropriate. This document is unclassified and contains no proprietary information, trade secrets, copyrighted material or classified information and is available for unlimited distribution.
The System/Subsystem Specification (SSS) specifies the requirements for a system or subsystem and the methods to be used to ensure that each requirement has been met
The System/Subsystem Specification (SSS) specifies the requirements for a system or subsystem and the methods to be used to ensure that each requirement has been met
| a008_cdrl_sss_amm_w81xwh-14-c-101_3feb2020_rev2.docx |
CDRL A009 - Test Procedure
This is the MoHSES (AMM) Test Procedures CDRL Item A009 of Contract # W81XWH-14-C-0101, Phase II. This document defines the procedures used for testing all aspects of the platform performance during the development process.
This CDRL is formatted to the requirements of Data Item Description Number Data Item Description Number DI-NDTI-80603A. This document is unclassified and contains no proprietary information, trade secrets, copyrighted material or classified information and is available for unlimited distribution.
The test procedure has been divided into parts. In section 3.1 the MoHSES Medical Scenario Verification Tests (MSVTs) are defined. These are tests related to patient events and how well the manikin performs in relation to actual human data. In section 3.2 the Engineering Verification Tests (EVTs) are defined. These tests verify the engineering of the manikin as related to size, weight, construction workmanship, motion and electrical/software functionality. They also verify the reliability and usability in relevant environments.
The tests procedures provide the following information per Data Item Description Number DI-NDTI-80603A.
● Purpose of the test
● Description of the Test Article
● Test Requirements
● Test Equipment
● Step by Step Test Procedure
● Data Sheet
All tests described in this document relate to the MoHSES platform and not the individual modules that were used to demonstrate the operation of the platform. Module developers can use the Reference Design of MoHSES CORE as documented in CDRL A004, Section 3.1 both for development work but also to test for compatibility.
This CDRL is formatted to the requirements of Data Item Description Number Data Item Description Number DI-NDTI-80603A. This document is unclassified and contains no proprietary information, trade secrets, copyrighted material or classified information and is available for unlimited distribution.
The test procedure has been divided into parts. In section 3.1 the MoHSES Medical Scenario Verification Tests (MSVTs) are defined. These are tests related to patient events and how well the manikin performs in relation to actual human data. In section 3.2 the Engineering Verification Tests (EVTs) are defined. These tests verify the engineering of the manikin as related to size, weight, construction workmanship, motion and electrical/software functionality. They also verify the reliability and usability in relevant environments.
The tests procedures provide the following information per Data Item Description Number DI-NDTI-80603A.
● Purpose of the test
● Description of the Test Article
● Test Requirements
● Test Equipment
● Step by Step Test Procedure
● Data Sheet
All tests described in this document relate to the MoHSES platform and not the individual modules that were used to demonstrate the operation of the platform. Module developers can use the Reference Design of MoHSES CORE as documented in CDRL A004, Section 3.1 both for development work but also to test for compatibility.
| a009_cdrl_test_procedure_amm_w81xwh-14-c-0101_3feb2020-rev2.docx |
CDRL A010 - Test/Inspection Report
This is the MoHSES (AMM) Test Inspection Report CDRL Item A010 of Contract # W81XWH-14-C-0101. This document is unclassified and contains no proprietary information, trade secrets, copyrighted material or classified information and is available for unlimited distribution.
This CDRL is formatted to the requirements of Data Item Description DI-NDTI-80809B as required and has been tailored as appropriate. This document is the Test/Inspection Report for developmental tests performed on the BioGears Physiology Engine, Universal Hybrid Connector, Virtual Patient module, fluid system, and Core Software. All test results included in this document are either for required components of the core MoHSES system (that for compliance purposes must be included in the system) or components included as part of a reference implementation to demonstrate the functionality of MoHSES platform. For instance, components of the fluidics system may not be required for modules being developed for the platform as long as the connectors are MoHSES compatible.
This CDRL is formatted to the requirements of Data Item Description DI-NDTI-80809B as required and has been tailored as appropriate. This document is the Test/Inspection Report for developmental tests performed on the BioGears Physiology Engine, Universal Hybrid Connector, Virtual Patient module, fluid system, and Core Software. All test results included in this document are either for required components of the core MoHSES system (that for compliance purposes must be included in the system) or components included as part of a reference implementation to demonstrate the functionality of MoHSES platform. For instance, components of the fluidics system may not be required for modules being developed for the platform as long as the connectors are MoHSES compatible.
| a010_cdrl_test_inspection_report_amm_w81xwh-14-c-101_03feb2020_rev2.docx |
CDRL A011 - Interface Control Document (ICD)
This is the MoHSES (AMM) Interface Control Document (ICD) CDRL Item A011 of Contract # W81XWH-14-C-0101. This CDRL addresses the requirements of Data Item Description Number DI-SESS-81248B as required. It is tailored to address the interfaces of MoHSES, which is not a specific training manikin, but a medical simulation platform, including specifications and a Reference Implementation (RI). This document is unclassified and contains no proprietary information, trade secrets, copyrighted material or classified information and is available for unlimited distribution.
This Interface Control Document (ICD) is an “Umbrella Document”. It describes how MoHSES interface requirements are controlled, by referencing other CDRLs, especially the Interface Description Document (IDD), and industry standards that provide detailed interface descriptions.
As a MoHSES design principle, interfaces between MoHSES modules, including mechanical, fluid, data, and electrical, are required by the MoHSES standards, whereas interfaces within a module may be determined by individual developers, as long as interface requirements between modules are met.
An interface control document in systems engineering and software engineering, provides a record of all interface information generated for a project. The underlying interface documents provide the details and describe the interface or interfaces between subsystems or to a system or subsystem
This Interface Control Document (ICD) is an “Umbrella Document”. It describes how MoHSES interface requirements are controlled, by referencing other CDRLs, especially the Interface Description Document (IDD), and industry standards that provide detailed interface descriptions.
As a MoHSES design principle, interfaces between MoHSES modules, including mechanical, fluid, data, and electrical, are required by the MoHSES standards, whereas interfaces within a module may be determined by individual developers, as long as interface requirements between modules are met.
An interface control document in systems engineering and software engineering, provides a record of all interface information generated for a project. The underlying interface documents provide the details and describe the interface or interfaces between subsystems or to a system or subsystem
| a011_cdrl_icd_amm_w81xwh-14-c-101_03feb2020_rev2.docx |
